Product details
DT Alpine III is the spoke with the lowest weight in relation to its stability. This is accomplished through a complex production process. Starting with a spoke of 2.34 mm, the diameter is reduced at the thread to 2 mm and to 1.8 mm in the middle section during the cold forging process. This allows weight savings of 173 g compared to spokes with a constant diameter. Despite the light centre piece, DT Alpine III is very durable and is perfectly suited for the big loads occurring in high performance e-bike or tandem wheels. Weight: 418 g for 64 spokes at a length of 264 mm.
- Product type J-bend
- Blading None
- Reduction Triple butted
Select your model
Model finder
Just a few clicks to find your model. Please use the filter below.
DT alpine III J-bend silver 2.0 / 1.85 / 2.34 -/-
SA3023___N0100- Product type J-Bend
- Blading None
- Reduction Triple butted
- Approved for e-bikes Yes (max. 32Km/h or max. 250W)
- Color Silver
- Length [mm] (L) 168 - 340
- Diameter 1 [mm] (D1) 2
- Diameter 2 [mm] (D2) 1.85
- Diameter 3 [mm] (D3) 2.34
- Width 1 [mm] (B1) -
- Width 2 [mm] (B2) -
- Thread 2.0 / FG 2.3
- Height of head [mm] (H) 7.8
- Angle (A) 90 - 95°
- Gauges 14 / 15 / 13
DT alpine III J-bend black 2.0 / 1.85 / 2.34 -/-
SA3023___S0100- Product type J-Bend
- Blading None
- Reduction Triple butted
- Approved for e-bikes Yes (max. 32Km/h or max. 250W)
- Color Black
- Length [mm] (L) 168 - 340
- Diameter 1 [mm] (D1) 2
- Diameter 2 [mm] (D2) 1.85
- Diameter 3 [mm] (D3) 2.34
- Width 1 [mm] (B1) -
- Width 2 [mm] (B2) -
- Thread 2.0 / FG 2.3
- Height of head [mm] (H) 7.8
- Angle (A) 90 - 95°
- Gauges 14 / 15 / 13
Product support
-
First go to Product Support and select your wheel using the DT Swiss ID or filter. Under "Spare Parts" you will find the exact details on spoke length and type. You will also find helpful How To videos and manuals. Make a note of the material number and order it from a dealer.
-
You can use the Spoke Calculator to work out the correct spoke length and wheel weight. If your dealer doesn't have your required spoke length in stock, use one that is 1 mm longer.
For dealers: Order spare parts via our distributors or directly via our B2B online shop. Prices and availability are shown directly on the B2B online shop.
-
You can buy all spare parts, conversion kits, and tools from a dealer.
You can find the right spare part or conversion kit under Product Support. First go to Product Support and select your product using the DT Swiss ID or filter. Under "Spare Parts" you will find the exact details on all the components of your product. You will also find helpful How To videos and manuals. Make a note of the material number and order the spare part from your dealer.
For dealers: Order spare parts via our distributor or directly via our B2B online shop. Prices and availability are shown directly on the B2B online shop.
-
If you're able to repair your wheel yourself, you can also buy our DT Swiss Proline wheel building tools. Make a note of the material number and order the tools from your dealer.
Please note: DT Swiss is not liable for any damage that arises through improper product maintenance. The warranty expires if you do not comply with the manual.
For dealers: Order through your distributor. Dealers in Switzerland, France and Poland can also order via our B2B online shop. Prices and availability are shown directly on the B2B online shop.
