DF Technology
An anti-pedal kickback system simplified to the max
The new DF technology is an anti-pedal kickback device simplified to the max. The DF technology releases the pedal kickback at the point where it occurs: in the freehub. This prevents unwanted chain pull during compression before it reaches the crank via the chain and negatively affects the rider. This results in improved downhill riding behavior with natural feedback from the trail and bike without the influence of unwanted chain pull.
Retrofittable to all Ratchet DEG freehub systems and lighter than other solutions, just replace the hubs threaded ring and the two ratchets to enjoy three different degrees of freehub movement: 0°, 10° and 20°.
DF = 0°
The engagement angle of the Ratchet DEG hub is main-tained, therefore not affecting the frame's kinematic pedal kickback. The 0° setup could be better suited to a Cross Country practice, where freehub engagement speed is key.
DF = 10°
The freehub system has 10° of freedom to rotate with certainty before engaging, resulting in reduced pedal kickback. The 10° setup could be better suited to an All Mountain practice, where pedal kickback becomes no-ticeable and can be part of the bike setup.
DF = 20°
The freehub system has 20° of freedom to rotate with certainty before engaging, providing the greatest pedal kickback reduction in our system. The 20° setup could be better suited to the Enduro / Downhill practice, where pedal kickback is part of the bike setup.
ratchet deg df - SETUP
ratchet deg df - Conversion
