The tensiometer is a high-precision tool to measure spoke tensions. Developed by DT Swiss and 100 % Swiss made, it is used to precisely measure the spoke tension step by step during the wheel building process.

The digital tensiometer is equipped with a digital gauge, allowing fast and easy reading of measurements. Using its Opto-RS232 data output device, the measured values can be transmitted directly to a PC or printer via connecting cable.

The DT Swiss tensiometer is a necessity for any professional wheel builder. Can be used with all spoke types including flat spokes. Includes case.

Please also check out the information in the User manual.

Ref. no. analog: TETTAXXR05500S

Ref. no. digital: TETTDXXB05518S

The DT Swiss truing stand is the ultimate stand used by professionals. It is made of precision machined, polished and anodized aluminium with hardened steel guides and mounts.

  • High-end quality and easy handling
  • Quicker wheel building
  • Compatible with all current bicycle wheels (12" – 29") with quick release or thru axle
  • Three precision multilink arms providing a wide range of contact points
  • Playfree precision gauges to measure lateral and vertical dish
  • extremely stiff and solid clamping
  • Wheel can be trued with tires
  • Can be installed on a table or clamped into a vice
  • Upgrades: Analog gauges including measuring insert with ball, special measuring inserts with rounded washers or ball bearing steel roll, truing adapters for all axle configurations

Please also check out the information in the User manual

Ref. no.: TUTXXXXS05520S 

  • Fits all DT Swiss suspension forks and shocks, 20bar/300PSI max. pressure
  • Minimal packing size thanks to removable gauge and foldable hose
  • Anti air-loss coupler for precise set-ups (no air loss when removing pump from valve)
  • Suitable for right- and left-handed people
  • Air bleeder for fine tuning
  • Rubber padded gauge housing

Please also check out the information in the User manual

Ref. no.: CXTXXXXX08660S

These spoke holders effectively eliminate spoke twist when truing or building wheels with bladed spokes (e.g. DT aerolite). Thanks to their design, the spoke can be held close to the nipple, which eliminates twisting. Compatible with all DT Swiss nipple wrenches.

 

Ref. no. red: TTSXXXXR05641S

Ref. no. black: TTSXXXXS05644S

HOW-TO VIDEO

Professional tool for a precise fit onto the torx nipple (black) and square nipple (red).

 

Ref. no. black: TTSXXXXS05665S

Ref. no. red: TTSXXXXR05664S

HOW-TO VIDEO

The matching nipple wrench for DT Swiss nipples with an internal drive. Available for DT Swiss nipples with hexagonal (blue handle), torx (black handle) or square (red handle) heads.

  • Less hand force needed
  • Facilitates work with bladed spokes
  • Developed by DT Swiss
  • Also suitable for high profile rims (max. 100 mm)

Ref. no. red: TTSXXXXR05631S

Ref. no. blue: TTSXXXXB05632S

Ref. no. black: TTSXXXXS05630S

HOW-TO VIDEO

Makes screwing the nipple onto the spoke quicker and easier.

Ref. no.: TZSXXXXNNIDRIS

DT Swiss special grease 20 g, multi purpose grease 20 g.

 

Ref. no.: HXTXXX00NSG20S

  • Service kit for 3 Pawl System: 3 pawl, spring & grease
  • Service kit for Ratchet System: 2 ratchets, 2 springs, grease
Ref. no. Description

HWTXXX00NSKONS

SERVICE KIT FOR 2 PAWL SYSTEM (2 PAWL, SPRING & GREASE) 

HWTXXX00NSK3PS

SERVICE KIT FOR 3 PAWL SYSTEM (3 PAWL, SPRING & GREASE) 

HWTXXX00NSK24S

SERVICE KIT 18T ( 2 RATCHET , 2 SPRING, GREASE) 

HWTXXX00NSKTFS

SERVICE KIT 24T ( 2 RATCHET , 2 SPRING, GREASE )

HWTXXX00NSKZLS

SERVICE KIT SL 18T ( 2 RATCHET , 2 SPRING, GREASE ) 

HWTXXX00NSK36S

SERVICE KIT SL 36T ( 2 RATCHET , 2 SPRING, GREASE ) 

HWTXXX00NSK54S

SERVICE KIT SL 54T ( 2 RATCHET , 2 SPRING, GREASE )

 

 

Correct use of wheel building tools

In order to give you a better service DT Swiss uses cookies. By continuing to browse the site you are agreeing to our use of cookies.